| |
|
APSWATER
Now merged with ResinDepot.com
|
800-460-9011
Toll Free
|
Home | Products | Tech Info | About US |
<%
if session"history"<>"" then
end if
%>
|
|
Welcome to our new high speed version of our website.
This site contains less detailed info to make it faster and uncluttered.
For more detailed info
Return to the standard site
View Cart
|
D4631
Barnstead E-Pure Laboratory Water Purification System
This 3 housing system is designed to provide up to 3 l.p.m. of high purity water.
Replacement Filters
Operating Manual
Other Comparable Units
Price : $3,502.65
Product Information
This unit produced C.A.P. or NCCLS Type I quality water or better. The E-pure systems produce up to (3L/min. of Ionic, organic and bacteria free water.
Virgin polypropylene water pathways prevent recontamination. One-quarter turn quick release filter housings allow for easy cartridge replacement. Positive O-ring seal on head-to-canister connection. Flat-bottom canisters stand on benchtop during cartridge servicing.
Includes solid-state digital purity meter that displays output water resistance from 0.01 to 18.3 megohm-cm with automatic temperature compensation to 25°C (77°F.
High gear ratio recirculation pump supplies ultrapure water without long rinseup, plus quiet operation.
Inlet temperature range, 4° to 49°C (39° to 120°F.
These systems can run on tap water but it is remended that you pretreat them with either reverse osmosis or deionized water.
Both models have maximum flowrate of 3 qt./min. (3.0L/min.,
1/4 NPTF inlet connection,
built-in pressure regulator;
operate on 120V 50/60Hz.
Includes
canisters,
digital meter,
pump,
6 ft. (1.8m of 1/4 in. O.D. flexible tubing for inlet and recirculation connections. Optional Organicfree* cartridge (Cat. No. 09-034-175K lets you use E-pure systems for HPLC and other critical applications.
Can be used with optional remote dispenser accessory.
Note:Filter cartridges and final filter are not included.
| This product appears in the following categories |
| | | |