|
APSWATER
Now merged with ResinDepot.com
|
800-460-9011
Toll Free
|
Home | Products | Tech Info | About US |
<%
if session"history"<>"" then
end if
%>
|
|
Welcome to our new high speed version of our website.
This site contains less detailed info to make it faster and uncluttered.
For more detailed info
Return to the standard site
View Cart
|
pH-STOR-QT
Calibration Standard
Quart- pH Sensor Storage Sol.
Price : $28.65
Product Information
Mryon L DS, pDS, Techpro and Ultrameter are factory calibtrated with NIST traceable standard solutions having specific conductivity/TDS values. Myron L Company Standard Solutions are made under strictly controlled conditions using reagent grade salts. These are mixed with deionized water having a resistivity of at least 5 megohm-cm purity. Myron L Company Standard Solutions are accurate within 1.0% of potasuim chloride reference solutions. These solutions are traceable to National Institute of Standards of Technology Primary Solutions. The following conductivity standard solution and pH buffers are used for factory calibration. Regular use of these solutions is recommended for greatest instrument accuracy. Frequency of conductivity recalibration depends upon use, but once every three months should be sufficient for an instrument used daily. pH models should be recalibrated with pH 7 buffer every 1-2 weeks, with 4 and 10 buffers every 6-80 weeks. pH buffers and standard solutions available in quart and gallon plastic bottles, ready to use.
| This product appears in the following categories |
| | |