Manganese Greensand

Manganese Greensand is formulated from a glauconite greensand which is capable of removing iron, manganese, and hydrogen sulfide from water through oxidation and precipitated by contact with higher oxides of manganese on the greensand granules. The hydrogen by backwashing. When the oxidizing capacity power of the Manganese Greensand bed is exhausted, the bed has to be regenerated with a weak potassium permanganate, in solution, per/ cu. Ft. of Manganese Greensand is considered sufficient for normal regeneration. It is advisable to vigorously backwash and regenerate the bed when it is placed in service and before the oxidation capacity it totally is exhausted. To operate the bed after its oxidation capacity is exhausted may reduce its service life.

Capacity/Cu. Ft.:

• Iron Alone--550 gr. (10.000 gal. Of water conditioning 1 ppm iron/cu. Ft.)
  
• Iron and Manganese--400 gr. (7,000 gal of water containing 1/2 ppm iron and 1/2 ppm manganese/ cu. Ft.)
  
• Hydrogen Sulfide - 175 gr. (3,000 gal. Of water containing 1 ppm hydrogen sulfide, cu. Ft)
  

Advantages:

• Iron removal over wide pH range
  
• Effective removal of hydrogen sulfide in addition to iron and/or manganese
  
• No harmful effects from chlorine feed
  
• Low attention loss for long bed life
  

Physical Properties:

• Color - Black
  
• Density -85 lbs./cu. Ft.
  
• Effective Size -0.30 - 0.35 mm
  
• Uniformity Coefficient - 1.6
  
• Mesh Size - 16 - 60
  
• Attrition Loss Per year - 2%
  

Conditions For Operation:

• Raw Water pH -  6.2  - 8.8
  
• Bed Depth - 30 in.
  
• Freeboard - 35 - 50%
  
• Service Flow Rate - 8-12 gpm. Sq. ft., 8-10 gpm/sq. ft. intermittent flow possible
  
• Backwash Flow Rate - 8-12 gpm. Sq. ft.
  
• Maximum Temperature Raw Water - 80of, - 26.7 oC
  
• Maximum Practical Limit of Iron (Fe ++) or Manganese (Mn ++) In Raw Water -  15 ppm.
  
• Maximum Practical Limit of Hydrogen Sulfide (H2S) - 5 ppm.