Your Barnstead|Thermolyne ROpure Infinity has
been designed with function, reliability, and safety
in mind. It is your responsibility to install it in
conformance with local electrical codes. This
manual contains important safety information.
You must carefully read and understand the
contents of this manual prior to the use of this
equipment. For safe operation, please pay
attention to the alert indicators throughout the
Water purification technology employs one or
more of the following: chemicals, electrical devices,
mercury vapor lamps, steam and heated
Low cost ultrapure water from a pretreated source.
The Barnstead MicroPure is a replacement for the popular EasyPure lab water system. The Barnstead Micropure offers outstanding control high-precision and USP-complying conductivity measurement with temperature compensation that can be switched on or off.
The Barnstead MicroPure system delivers ultrapure 18.2MW.cm water with consistent quality for the most demanding and sensitive applications.
ST models have a reservoir that you fill with semi-pure water while standard units connect to a pressurized feed source.
High capacity ultrapure water from a pretreated source.
The Barnstead Genpure series systems provide high quality laboratory water from pretreated water. These include the GenPure GenPure Pro and Genpure XCAD lab Water systems. All three of these series are available as a basic version low organic version pyrogen free version or an ultrapure low organic/pyrogen free system.
The Barnstead GenPure offers outstanding control high-precision and USP-complying conductivity measurement with temperature compensation that can be switched on or off.
The Barnstead GenPure system delivers ultrapure 18.2MW.cm water with consistent quality for the most demanding and sensitive applications.
The Barnstead Smart2Pure is a replacement for the popular EasyPure RO/DI lab water system. The Barnstead Smart2Pure offers outstanding control high-precision and USP-complying conductivity measurement with temperature compensation that can be switched on or off.
The Barnstead Smart2Pure system delivers ultrapure 18.2MW.cm water with consistent quality for the most demanding and sensitive applications.
Type I. Produce up to 2 qt. per min. (2L per min. of Type I reagent-grade bacteria free water. Virgin polypropylene water pathways prevent recontamination and one quarter turn quick release canisters allow for easy cartridge replacement. Positive O ring seal on head to canister connection. Flat bottom canisters stand on bench top during cartridge servicing. With solid-state digital purity meter that displays output water resistance from 0.01 to 18.3 megohm-cm with automatic temperature compensation to 25°C - 77°F
Barnstead B-Pure Water System is a 2 housing system designed to provide 3 l.p.m. of high purity water. Modular B-pure systems provide you the flexibility to design your own water system. Simply add additional filter cartridge holders as your water needs change. Systems produce up to 4 liters per minute. Use Single System as an economical stand alone system or attach more than one together using the provided hardware. Double system comes with a draw-off valve and digital temperature compensated purity meter. Max. inlet pressure: 100 psig.
In this section you will find that Barnstead Bantam is a Great Portable non pressure cartridge system for polishing pretreated water or single-stage purification of tap water. Delivers deionized water at 5 to 10 gal./hr. (19 to 38L/hr.
In this section you will find Barnstead EasyPure Systems are available in six models-
RF (Reservoir Feed) RF/UV (Ultraviolet and Reservoir Feed) LF (Line Feed) UV (Ultraviolet) UF (Ultrafiltration) and UV/UF (Ultraviolet and Ultrafilter) . All models feature a whisper-quiet pump and a standby mode which recirculates water within the system for 10 minutes during every hour of inactivity. All units except RF and RF/UV come complete with a bracket for wall mounting.
In this section you will find the very convenient Barnstead EasyPure RoDi Systems. These lab water systems combine both Pretreatment (reverse osmosis and deionization (polishing system into a single unit that is perfect for applications requiring an economical and consistent lower demand supply of deionized water.
Type I. Ultrapure water system supplies Type I water with resistivity up to 18.2 megohm·cm that exceeds ASTM CAP and NCCLS Type I water requirements. Also complies with USP XXIII guidelines with compensated and uncompensated resistivity measurements. Multilanguage display; whisper-quiet operation.
Barnstead has disconinued this system although we do still offer support parts and replacement filters.
Produces up to 3 pt./min. (1.5L/min. of water virtually free of any contamination. System provides for adsorption deionization UV oxidation and ultrafiltration. Automatic intermittent flush keeps impurities from forming on the ultrafilter surface. Water quality: pyrogen level <0.001EU/mL; TOC <2ppb; and bacterial level <0CFU/mL. Water has no detectable RNase DNase or DNA. With standard 10000MW ultrafilter; and dual-wavelength (185 and 254nm UV lamp.