Timer Based Water Softeners regenerate based on the amount of time that has passed since the last regeneration. Timer based system have an advantage over meter based system if you do not use enough water to make the softener regenerate at least every two weeks. It is helpful for the softener to regenerate in order to clean the resin and remove dirt that can become trapped in the bed.
Fleck is one of the top manufactures of softener controls in the world. With this tops selling brand of controls we offer many softeners to fit your need.
The Autotrol Controllers are unrivaled in simplicity and is easier to program than any other electronic controllers on the market today. The Logix Controllers are factory-programmed with complete salt tables and operational parameters. The resin volume is set then only the time of day day of the week hardness and the salt amount needs to be set. 12 Volt AC Adapter. These simple time clock controllers give the installer the option of a 7-day (day of the week) or up to a 99-day regeneration frequency setting.
The 740 can also be used for either a softener or filter application (with adjustable backwash time). Includes a
remote regeneration signal input. This controller is great for residential and light commercial applications up to 3 cu. ft. of resin.
The Logix 760 demand controller - This economy model demand control will set a new standard for simple and efficient controllers. The 760 includes single programming with a 28-day variable reserve feature and the ability to change the time of regeneration. This cost-effective controller is a great for residential and light commercial applications up to 3 cu. ft. of resin.
Softeners include Autotrol 255 Logix valve with 740 6-day time clock or 760 microprocessor 3/4" bypass blue polyglass mineral tank charcoal 15" x 17" x 36" brine tank with pick-up and standard mesh or fine mesh resin.
The Clack 1" electronic valves was designed with the water treatment professional
in mind and incorporates many features that were a direct result of feedback from customers.
The valves are manufactured from composite plastics and are designed to provide
high fl ow rates up to 227 gpm over a wide range of applications. The Clack valve also
features state-of-the-art electronics and programming software.
Softeners include Clack electronic meter or time clock valve 3/4" tube adapters
(1" on 80000 grain systems and above) polyglass mineral tank charcoal 15" x 17" x 36" brine
tank (except as noted) with air check and standard or fine mesh resin.