Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for cold water. Components for converting either or both fixtures to air and vacuum are provided. Inlet tubing is not provided.
Protector Premier Laboratory Hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of Labconco’s leading line of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. Without seams, the interior has fewer points of deterioration for longer life.
These hoods are suitable for providing personal protection needed for general chemistry applications involving fumes and vapors. They meet the SEFA-1 standard of a low velocity, high performance hood and may be safely operated as low as 60 fpm. Choose from hoods designed to be used with a remotely-located blower or hoods that include a built-in blower — the only high performance hood with built-in blower available anywhere. Explosion-proof hoods with built-in blower are available for laboratories with potentially explosive/flammable atmospheres (Class 1 Div I or II).
- Product Subcategory:General Chemistry
- Nominal Width:4'
- Blower Requirements:Integral explosion-proof blower included
- Conformance:ASHRAE 110, ASTM E84, CAN/CSA C22.2, NFPA 45, SEFA 1, UL
- Enclosure Height:66.0"
- Explosion-Proof:Explosion-Proof Model
- Service Fixtures:2
- Weight:365.0 lbs
- Weight metric:166.0 kg
- Dimensions:48.0" w x 31.7" d x 66.0" h
- Dimensions metric:121.9 x 80.5 x 167.6 cm
- Electrical:208-230 volts, 50 Hz, 5 amps