D2716 ROPURE LP 120V 60HZ

An Economical method of removing a high percentage of raw feedwater contaminants (90 to 99% of all impurities. Ideal as pretreatment to a Nanopure* Quad-style, Nanopure II, or older Nanopure system for significantly extending the life of consumable ion-exchange cartridges. Provides RO (reverse osmosis purified water for volume requirements of 4, 8, or 10 gal./hr. (15, 30, or 40L/hr. depending on membrane selection (order membranes separately. Maximum inlet pressure: 100psi (7kg/cm2. Minimum inlet pressure: 30psi (2kg/cm2. System is wall mounted and operates from tap water line pressure. With built-in, solid-state periodic flush timer that automatically flushes the membrane when the system is in a standby condition (a full storage reservoir. Prevents accumulation of contaminants on the membrane. Connects directly to a Nanopure Quad-style, Nanopure II, or older Nanopure system, glassware washer and storage reservoir without complicated plumbing. Basic unit with 10 in. long (25cm, 5µm prefilter; wall bracket; 15 ft. (4.5m in length of 1/2 in. O.D. tubing; 20 ft. (6m in length of 3/8 in. O.D. tubing; adapters, and storage interlock jumper plug. Order membranes separately (see top right. Dimensions: 83/4L x 203/4W x 38 in.H (22 x 53 x 97cm. Shipping weight, 75 lb. (34kg. For 115V 60Hz.