753ii-11-4A Myron-L 750 II Digital Resistivity Monitor-Controller

753ii-11-4A Myron-L 750 II Digital Resistivity Monitor-Controller
Measures Water Resistivity. 0-20 megohm with 4-20ma output and alarm contact functions. 110 VAC
Resistivity Cell Required.
Operating Manual
750II Resistivity Monitor without alarm and 4-20ma functions
List PriceUS$1,110.50
Our PriceUS$1,082.50
Catalog ID753ii-11-4A

  • Affordable
  • Ease of Operation
  • Low Maintenance
  • Ensures Product Quality

The unique circuitry of our 750 Series II Resistivity Monitor/controllers guarantees accurate and reliable measurements. Drift-free performance is assured by "field proven" electronics, including automatic DC offset compensation and highly accurate drive voltage.

Since Temperature Compensation is at the heart of accurate water measurement, all Myron L® Monitor/controllers feature a highly refined and precise TC circuit. This feature perfectly matches the water temperature coefficient as it changes. All models are corrected to 25°C. The TC may be disabled to conform with USP requirements.

Built-in electronic calibration allows for fast quality checks.

A push-to-test button makes setpoint checks easy, while the internal alarm set discourages unauthorized adjustments.

Standard on all controller models is a heavy-duty, 10-amp output relay, operating on either increasing or decreasing readings. Bright green/red LEDs indicate readings above or below setpoint.

Digital and Analog 750 Series II models have an IP65/NEMA 4X water-resistant & corrosion-proof rated enclosure. At 152 x 122 mm/6 x 4.8 in., all models are suitable for panel, bench or surface mounting.

Additional options include a 3 Sensor Input Switch and/or a 3 Range Switch and a Remote Alarm™ model RA.

No recommended products at the moment.
No recommended products at the moment.