How often do I need to change the resin in my softener
Usually you can get 10 years or more on city water and 5-10 years on well water that has iron, manganese or high levels of organic contamination.
The things that make the resin fail sooner are coating or oxidation of the resin.
Iron, Manganese and Organic contamination will coat the resin making it ineffective because they interrupt the ability of the charge to hold and let go as needed. An automatic resin cleaner can greatly increase the life of resin that is subject to fouling.
Oxidizers like Chlorine and Ozone attack the binders in the resin and turn them into fragments. Some of these fragments then get washed down the drain during regeneration causing loss of resin and capacity. With high levels of oxidizers the resin may turn to a jelly consistency. You can extend the life in this case by pretreating with activated carbon.
Common question from clients.
We have a 12 year old water softener but recently the water doesn’t seem treated so well. I had a sample tested today that came back with 17 grain and the village water is known to be around 26. So there was some improvement but not a lot.
The system seems to cycle fine and consumes salt at the usual rate it always has. Just wondering if the resin might have worn out (can it wear out or is it inert?).
Yes it sounds like you have a problem. Usually you get 5-10 years, but it really depends on the water. You could have a problem in the head that is letting hardness pass through the head. If it draws salt, that is good, but you could have a bad bypass valve or some other problem in the head.
So here are some options
Change the resin - see Selecting Resin and Changing Resin
You could change the head and the resin see Control Valves
Or you could just replace the softener and be trouble free for another 10 years.
See Selecting a softener and Water Softener Calculator
Also a general article about water hardness and solution can be found here.
|We Offer Over 28,000 Products|
|Purchase Orders Accepted
(subject to approval)
|Rated "A+" with the BBB||25 years|
|Click Here For Huge Savings|
|Best New Product|
Reverse Osmosis System
Great for Lab Water Pretreatment
or Great Drinking Water
|Got Well Water?|
Complete Treatment System
Own your own Municipal
Water Treatment Plant
Are You Lost?|
See Your Breadcrumbs
List All Products
APS Water Services Corp. 7320 Valjean Ave, Van Nuys, CA. 91406
800-460-9011 Toll Free | 818-786-0600 Local/International | 818-786-2347 Fax | Public@apswater.com
Images may or may not be of actual product.
* Flat Rate UPS shipping when able to ship via UPS and is in the USA excluding Hawaii and Alaska.
Larger Items may not be able to ship via UPS, in that case freight charges will be quoted seperately.
10/1/2016 at 12:04:46 AM
Clack is a registered trademark of Clack corporation