Due to a death in our organization we have temporarily changed our ordering procedures. We are now allowing phone in orders for in-stock items only, paid with a credit card. We are not currently accepting purchase orders. Existing orders will be processed. Thank you for your understanding.
Sanitization of Barnstead / Thermo E-pure Water System
Sanitization of Barnstead / Thermo E-pure Water System
Date : 6/3/2015
From :
Peter Siegfried
Question
Hello I recently inherited a lab space with a Barnstead E-pure Series 1090 DI water filter and am unsure of how to maintain it and make it operational again The filter has been inactive for almost 2 years and after reading through the manual Ive gathered that the final filter will need changing after a full sanitation and cartridge replacement The manual has written directions on how to sanitizereplace the cartridges but I was wondering if there were any videopicture tutorials available Also Id like to verify that the D50223 SANITIZATION CARTRIDGES and FL703X2 02 MICRON FINAL FILTER are the correct products to order for sanitizing this model and replacing the filter Thank you Peter Siegfried
Answer
There is no video but it is a simple process to do that.
1. Turn off water. 2. Open outlet valve to bleed off pressure 3. Remove all the filters 4. Install the sanitization filter in the first housing. 5. Reinstall all the housings. Do not install the filter on the outlet. 6. Turn on water and power with outlet valve open. 7 Allow the system to refill and bleed off air. 8. Once full, close outlet valve and allow the systems to run overnight. 9.Turn off water and power (outlet valve still open) 10. Remove sanitization filters and re-install housing. 11. Turn on water and power (outlet valve still open) 12. Allow the system to flush out sanitant for 15 minutes. 13. Turn off water and power (outlet valve still open) 14. remove all housings and rinse in sink. 15. Reinstall new filter set (b-cddo2 Kit) 16. Turn on water and power (outlet valve still open) 17. Allow system to refill and bleed of air. 18. Close outlet valve and allow system to run until the reading is greater than 18. (may take overnight) 19. Install new outlet filter. 20. Use water.
This high capacity four housing lab water system is designed to provide up to 3 l.p.m. of ultrapure water exceeding ASTM and CAP Type I, II or III specifications.
Code F, 2.5 inch X 10 inch. Coconut shell carbon block with 10 micron outer wrap. Special Prep 1, for Chlorine removal with low extractable applications - 1/pk
Filter Housing
IWT 3C0600002 Style High Capacity Filter - Cartridge Universal II
This High Capacity Mixed Bed Deionization Filter is used for the reduction of dissolved minerals. with Color Indicator - Comparable to IWT and US FILTER 3C0600002 and HC200 or HC-200
Great for Lab Water Pretreatment
or Great Drinking Water
Images are representative of the products. Images may or may not be of the actual product. If it is important e-mail us for an actual image if available.
* Flat Rate UPS shipping when able to ship via UPS and is in the USA excluding Hawaii and Alaska. Larger Items may not be able to ship via UPS, in that case freight charges will be quoted seperately. International shipping will be quoted after the order is placed. You will have the opportunity to cancel before we finalize your order.
